On the Spanker x1

In Corporal Punishment Spanking has alway played a big role.

But if your Parents dont want to spank you but you want to, then you go to selfpunishment.

But therer is one problem...

You cant really spank yourself effectively or in my case I just cant resist stopping.

So I came up with a new Concept parralel to my BTOC X2 which will have a spanking module.

This Machine offers you a wide range of spankings, it winds up with a electronic motor and can be adjusted in height and strengh by streching or destrechning the internal spring.

The thing about something like that is the Strengh, I wanted a minimal strengh wich is compared to my Strengh.

I rigged up a camera (240 Frames/second) and used my paddle to measure the speed while swatting into the air.

So here are my Results:

Swatting in the air speed:

70cm per 20 Frames

=70cm in 0,084 seconds

=8,33 m/s

Paddle weight: 82g (yes its a thin paddle)

Impulse:

p=m*k

p=0,082 kg * 8,33 m/s

p=0,68 hy

So I figured that the lengh of the swatting arm should be about 60cm.

Im calculating some more and ill be back better.

The Spanker will have a 8 pin connector that  has the following signals:

-Vcc +5V

-GND -

-LinearMotor pin1

-LinearMotor pin2

-WindupMotor pin1

-WindupMotor pin2

-Linear motor Potentiometer

-Windup motor Potentiometer

The Motors are powered over 2 seperate H bridges so you can reverse them.

I would really like to keep the spanking cooldown under 5 seconds, that means that there is a max of 5 seconds between every spank on the hardest setting (=12 spanks per minute = 60 spanks in a 5 minute spanking).

Currently Im rushing out Tech like crazy, I have a 1 week holiday the next week and my parents are away that time, so I want to make some good process there so I can finally execute the punishments left.

Take Care, 

David

The BTOT X1

Hey there,

I recently built the BTOT X1 and wanted to share some information's with you... so here are some pics ;)

The Controller (BTOC X1) based on a Arduino Uno

The completely assembled BTOT (Yes its a frame not a table...)

The Feet Straps fit around nicely and really hold you tight while still being comfortable

This is a SHC-E (Stationary Hand Lock - Electronic) uses a servo for locking

So this is my first model of Bondage Timeout Tables for people that don´t want to stay in time out ;)
Its kind of a pain to get in and out because you have to remove the middle tower to access ankles so I might replace them with Electronic locks later on in version 1.1 or simply just replace the middle tower with a different construction (well thats not really simple if you want it compact...
The feet straps don´t have padding and your foot is resting one bare aluminium but I sanded it down so it still is really comfortable.
Overall I have things to do better as this is only experimental but when being in there there is absolutely no way of getting out unless the hand locks open again, movement is very restricted and the only thing you can do is to wait for the clock to tick down...
For the next version I will definitely keep the Hand lock as well as the feet straps because they fit into the aluminium profiles which i will continue to use in the future.

In the next Days I will post some concepts and Ideas about version 2 of this stuff on here.
You will see news on The module Server System that comes with the BTOC X2 (maybe even today as I´m working hard on it).
Maybe I will even make the Module system for sale if I come up with a idea to make it really safe and bypass my parents :)
The thing with this is: when the controller fails it has to open no matter what, if not, your stuck... really stuck!

So until next time...
See ya,
David

Tech Update #1

Hey there,

I just wanted to pump out a quick update on what I´m currently working on...
Yesterday I started Version 2 of my BTOC Punishment controller since the first version was a prototype.
Currently I´m designing some PCB´s for my custom module arduinos which communicate over serial.
I´m working on following modules:
-BTOC X2 (Main controller, host)
-Lodule (Logging module, saves on SD cards the traffic in serial connection)
-USV (Emergency Battery Power supply)
-Nappy (experimental module for early bedtime or forced naps, locking the person in bed)

I am using custom flashed Arduino chips (Atmega 328 Pu).
I will release Schematics and software as soon as I´m happy with the concept.

Later this Day I will post some pictures ;)

See ya´ll next time,
David

Project Plans 2014

Hey there,

This is a new Site to show the technology involved with Selfpunishment.
I welcome you to this blog as it just started and offers you a wide insight on the technology used in my projects.
For my first ever Post I´m going to talk about the things I already made and what projects I have planned for 2014 (Images will follow soon!)

First of all a list of all the things I have already made and tested (well not much but it works ;))
-Holed Paddle (Didn't use it much but it works)
-Prototype Enema Delivery Systems (always had problems with leaking pipe connections)
-Ivory Soap sticks (Like these because they are "plug and play")
-Curry Cream (Burns like hell... literally)
-Butt Plugs (I don´t use them often)

Now I want to go over the Projects I´m working on right now.
In my projects I usually refer to short names of other Projects but ill try to include links in every Post.

Bondage Timeout Table (BTOT v1)
This project has been bugging me for a while now as I always wanted a way to force myself into the Punishments, usually I would stop the timeout or similar things before the timer ran our.
But there´s an end to that problem because the BTOT is here.
Its not really a frame but its a framework that has two straps to hold the ankles and a electronic handcuff that secures the Hands of the Victim behind the Back.
The whole thing is controlled by an Arduino microcontroller hooked up to a Dotmatrix Display that displays informations.
Right now the board looks kinda messy because I don´t have a housing yet and it is still a prototype...
It will be able to accept special modules called "punishers" to automaticly punish the Victim once inside.
I hope that I will get following modules done this Year:
-Spanker (advanced Planning Phase)
-Fluipun (Rectal Fluid Injector, on hold)
-Cleaner (Soap Stick injector, Planning Phase)

I hope I gave you enough informations on what I do,
but this is it for this Post.
I will post Images and detailed Informations soon, theirfor I recommend you to sign up for the E-Mail newsletter.
Feel free to ask Questions with comments or send me a E-Mail with the contact form at the bottom of the page ;)

Thats it,
David signing off